EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
MDPE10 Extruder Screws
MDPE10 Extruder Screws
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
EX6 Extruder Screws - Filabot
MDPE10 Extruder Screws
MDPE10 Extruder Screws

MDPE10 Extruder Screws

FB00957

Screw Design
  1. Where does Massive Dimension ship to?
    We are a worldwide company that ships nearly everywhere. From the US, to China, to Australia we do our best to ensure our customers orders are met and their systems shipped to where they need to be! 

  2. Shipping Terms: EX Works (EXW) - Barre, Vermont
    The seller is responsible for making the goods available at the specified location of Barre, Vermont. The buyer assumes all transportation costs and risks from that point onward. The customer responsible for any applicable taxes, duties, and customs clearance.

  3. What is the lead time for my order?
    Lead times change on a weekly basis. If a product is in stock it will usually ship within 1-2 days. If we are waiting on a shipment, it can take up to 1-2 weeks to ship and if there is a lead time longer than 2 weeks for a specific product, it will be specified on the product page.
  4. Do you accept purchase orders?
    We do accept purchase orders for orders totaling more than $75. If the total is less than $75, we will charge a $25 processing fee. If you do not want to pay the extra processing fee, you can place the order online at massivedimension.com and pay by credit card.
  5. Where can I send my quote request or purchase order?
    All purchase orders, as well as quote requests can be sent to contact@massivedimension.com or can be accessed within your Shopping Cart for online quotes. 
  6. Our establishment needs to make Massive Dimension a registered vendor, can you fill out our forms?
    Please send all vendor forms, as well as W9 requests to us at contact@massivedimension.com and we will respond promptly!
  7. How much is it to ship my order?
    Shipping cost is calculated at checkout, rates will vary based on the speed and service you select.

Our screws are designed and tested by our engineers to meet a variety of customer needs. These screws for in the Filabot EX6 filament extruder and in the MDPE10 direct printing extruder.

Thermal Mixer Element (EX6-625-ME): Our stock general purpose screw profile with an additional thermal mixer element for mixing and compounding extrusion applications where a full melt is required.

High Fill Mixer Element (EX6-625-MEHF): Our stock general purpose screw profile with an additional mixer element for mixing and compounding extrusion applications. Works well for mixing additives, fillers, and co-polymer formulations where polymer has a high fill rate of carbon fiber, glass fiber, or other additives.

Standard (EX6-625): Our standard screw is designed for most PLA and ABS grades typically used for 3D printing, as well as other polymers with a similar melt viscosity. Our standard screw works best with pellets and granules in the 2-5mm size range.

High Shear (EX6-120-C2): This screw is the same spec as our Standard Screw, only shallower (high shear). This design can improve performance when using powders and smaller pellets (3mm and under).

Ultra High Compression (FB01018): This screw high our highest compression ratio of any screw we offer. This high compression works well for fast flowing polymers such as PET or PETG.

High Compression (EX6-120-C3): Best for pellets/granules in the 3mm and under range. This screw offers a higher compression than our Standard Screw.

Low Compression (EX6-145-C125): This screw can improve performance with higher melt viscosity polymers which require less compression. Pellets and granules in the 2-4mm size range work best with this screw.

No Compression (EX6-145-C0): This screw can improve performance with higher melt viscosity polymers that require no compression. Pellets and granules in the 2-4mm size range work best with this screw.

Full Screw Bundle (Includes all 7 screws): This bundle includes the 5 screws at a discount price. These screws are not plated with chrome. Bundle includes the No Compression, Low Compression, High Compression, Ultra High Compression, High Shear, High Fill Mixer Element, and Thermal Mixer Element


Click here for screw specs. 

 

No Videos Currently

You may also like

Endless Capabilities

MDPE10

The MDPE10 extruder can output up to 10 lbs of material per hour. Its impressive specs coupled with its extreme flexibility make it a highly capable contender for advanced printing in additive manufacturing.

Customer Testimonials

★★★★★

There is a very distinctive design language and quality of construction across all Massive Dimension parts. This combined with the fact that all these components are compatible with each other is a big selling point.

Dr. D-Flo

David Florian, Ph.D.

★★★★★

“We purchased an MDPH02 to convert an already existing industrial filament machine. They came to install it and did a wonderful job. Like most projects of the sort there were some unexpected issues but they made quick work of them and left us with a functioning pellet extruder on a previously filament based machine. Their product is well designed, well made and looks great on our machine!"

Studio Artefact - Montreal

Frédéric Letellier

★★★★★

“Thanks to the considered design of Massive Dimensions extruders we can print parts in a wide range of materials, including up to 400°C, effortlessly and successfully.”

AI Build

Luke Rogers - London